Cockpit controls must be designed so that they operate in accordance with the following movement and actuation:
(a) Aerodynamic controls:
(1) Primary.
Controls
Motion and effect
Aileron
Right (clockwise) for right wing down.
Elevator
Rearward for nose up.
Rudder
Right pedal forward for nose right.
(2) Secondary.
Controls
Motion and effect
Flaps (or auxiliary lift devices)
Forward for flaps up; rearward for flaps down.
Trim tabs (or equivalent)
Rotate to produce similar rotation of the airplane about an axis parallel to the axis of the control.
(b) Powerplant and auxiliary controls:
(1) Powerplant.
Controls
Motion and effect
Power or thrust
Forward to increase forward thrust and rearward to increase rearward thrust.
Propellers
Forward to increase rpm.
Mixture
Forward or upward for rich.
Carburetor air heat
Forward or upward for cold.
Supercharger
Forward or upward for low blower. For turbosuperchargers, forward, upward, or clockwise, to increase pressure.
(2) Auxiliary.
Controls
Motion and effect
Landing gear
Down to extend.
[Doc. No. 5066, 29 FR 18291, Dec. 24, 1964, as amended by Amdt. 25-72, 55 FR 29778, July 20, 1990]
About this text
Source: OFR/GPO eCFR. The wording is reproduced from the dated source, with formatting adapted for reading. The eCFR is an editorial compilation and is not the official legal edition of the CFR.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.