14 CFR · CERTIFICATION PROCEDURES FOR PRODUCTS AND ARTICLES

§ 21.319

Design changes.

Text as of November 12, 2026

(a) Classification of design changes. (1) A “minor change” to the design of an article produced under a PMA is one that has no appreciable effect on the approval basis.

(2) A “major change” to the design of an article produced under a PMA is any change that is not minor.

(b) Approval of design changes. (1) Minor changes to the basic design of a PMA may be approved using a method acceptable to the FAA.

(2) The PMA holder must obtain FAA approval of any major change before including it in the design of an article produced under a PMA.

About this text

Source: OFR/GPO eCFR. The wording is reproduced from the dated source, with formatting adapted for reading. The eCFR is an editorial compilation and is not the official legal edition of the CFR.

Check the latest eCFR text →

Working through a system safety question?

Bring the system, the certification basis and the issue your team needs to resolve.

Discuss your programme →