The empennage structure must be designed to assure capability of continued safe flight and landing of the airplane after impact with an 8-pound bird when the velocity of the airplane (relative to the bird along the airpl…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Limit load tests of control surfaces are required. These tests must include the horn or fitting to which the control system is attached. (b) Compliance with the special factors requirements of §§ 25.619 through 25.6…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Movable tail surfaces must be installed so that there is no interference between any surfaces when one is held in its extreme position and the others are operated through their full angular movement. (b) If an adjus…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) For control surface hinges, including ball, roller, and self-lubricated bearing hinges, the approved rating of the bearing may not be exceeded. For nonstandard bearing hinge configurations, the rating must be establi…
Use this reference to scope flight-control compliance work across normal operation, assembly design, failures, jams, and degraded modes. It is especially useful when connecting fly-by-wire architecture and failure assess…
DRS approval date: August 30, 2024
OFR/GPO eCFR · Regulatory textDated regulatory text
If the functioning of stability augmentation or other automatic or power-operated systems is necessary to show compliance with the flight characteristics requirements of this part, such systems must comply with § 25.671…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Each control system must have stops that positively limit the range of motion of each movable aerodynamic surface controlled by the system. (b) Each stop must be located so that wear, slackness, or take-up adjustmen…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Trim controls must be designed to prevent inadvertent or abrupt operation and to operate in the plane, and with the sense of motion, of the airplane. (b) There must be means adjacent to the trim control to indicate…
Text as of November 12, 2026
No matches in this collection.
Remove a filter, use fewer words or include historical and proposed publications. An empty result does not mean that the FAA has no relevant material.
1,177 section entries, 24 appendices and 3 SFAR entries as of November 12, 2026. Tables and 102 original graphics are included. Text inside graphics is not indexed.
Sections, appendices and included SFARs from Parts 21, 23, 25, 27 and 29 are searchable. Historical CFR editions are not included. Source tables and graphics are retained; text inside graphics is not indexed.
1,689 DRS catalogue records: 656 current and 1033 historical. 6 ACs have complete source copies and a separate search within each document.
Records returned by the FAA DRS AC feed, including current and historical editions. Other FAA collections may contain additional publications. AC PDF contents are not included in this collection search. Each hosted AC has its own full-document search. Your search is not sent to the FAA.
19 selected FAA, EASA and industry publication notes. This is not a complete EASA collection.
Reviewed notes and source links for FAA, EASA, SAE and EUROCAE publications. Proposed material and research are labelled. Licensed standards remain with their publishers.
This is an independent resource. The eCFR is an editorial compilation, not the official legal edition of the CFR. Dates, topic tags and source associations do not establish your programme’s certification basis. Confirm applicability and the required edition at the source.
Connect the reference to your programme.
Bring the aircraft or system, the applicable basis and the question your team needs to resolve.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Aircraft and system safety assessments
Flight controls, avionics and equipment
Certification planning and compliance evidence
FAA DER services within the applicable delegation
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Flight control and autoflight systems
Hazard assessments and architecture reviews
Avionics and systems integration
Certification and verification planning
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Aircraft and system safety assessments
Flight controls and actuation architecture
Development assurance and verification evidence
Certification planning and technical coordination
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.