(a) The airplane must be protected against catastrophic effects from lightning. (b) For metallic components, compliance with paragraph (a) of this section may be shown by— (1) Bonding the components properly to the air…
Text as of November 12, 2026
The reference collection
Search a citation or topic, narrow the collection and see what each source can tell you.
eCFR text: November 12, 2026 · FAA DRS capture: November 17, 2026
Dated source collection · automatic acquisition not yet scheduled
553–560 of 1,876 references
(a) The airplane must be protected against catastrophic effects from lightning. (b) For metallic components, compliance with paragraph (a) of this section may be shown by— (1) Bonding the components properly to the air…
Text as of November 12, 2026
The airplane may not have design features or details that experience has shown to be hazardous or unreliable. The suitability of each questionable design detail and part must be established by tests.
Text as of November 12, 2026
The suitability and durability of materials used for parts, the failure of which could adversely affect safety, must— (a) Be established on the basis of experience or tests; (b) Conform to approved specifications (such…
Text as of November 12, 2026
(a) The methods of fabrication used must produce a consistently sound structure. If a fabrication process (such as gluing, spot welding, or heat treating) requires close control to reach this objective, the process must…
Text as of November 12, 2026
(a) Each removable bolt, screw, nut, pin, or other removable fastener must incorporate two separate locking devices if— (1) Its loss could preclude continued flight and landing within the design limitations of the airpl…
Text as of November 12, 2026
Each part of the structure must— (a) Be suitably protected against deterioration or loss of strength in service due to any cause, including— (1) Weathering; (2) Corrosion; and (3) Abrasion; and (b) Have provisions f…
Text as of November 12, 2026
(a)Means must be provided to allow inspection (including inspection of principal structural elements and control systems), replacement of parts normally requiring replacement, adjustment, and lubrication as necessary for…
Text as of November 12, 2026
(a) Material strength properties must be based on enough tests of material meeting approved specifications to establish design values on a statistical basis. (b) Material design values must be chosen to minimize the pro…
Text as of November 12, 2026
Remove a filter, use fewer words or include historical and proposed publications. An empty result does not mean that the FAA has no relevant material.
Clear filtersSearch the wider FAA DRS collection ↗Orders, decisions and issue-paper sources →Source coverage
1,177 section entries, 24 appendices and 3 SFAR entries as of November 12, 2026. Tables and 102 original graphics are included. Text inside graphics is not indexed.
Sections, appendices and included SFARs from Parts 21, 23, 25, 27 and 29 are searchable. Historical CFR editions are not included. Source tables and graphics are retained; text inside graphics is not indexed.
OFR/GPO eCFR ↗1,689 DRS catalogue records: 656 current and 1033 historical. 6 ACs have complete source copies and a separate search within each document.
Records returned by the FAA DRS AC feed, including current and historical editions. Other FAA collections may contain additional publications. AC PDF contents are not included in this collection search. Each hosted AC has its own full-document search. Your search is not sent to the FAA.
FAA DRS ↗FAA AC catalogue ↗19 selected FAA, EASA and industry publication notes. This is not a complete EASA collection.
Reviewed notes and source links for FAA, EASA, SAE and EUROCAE publications. Proposed material and research are labelled. Licensed standards remain with their publishers.
Read selected reference notes →Additional official collections →This is an independent resource. The eCFR is an editorial compilation, not the official legal edition of the CFR. Dates, topic tags and source associations do not establish your programme’s certification basis. Confirm applicability and the required edition at the source.
Bring the aircraft or system, the applicable basis and the question your team needs to resolve.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
aero@aerospace.consultingA focused review, an agreed compliance package or ongoing support alongside your team.
This opens your email application.
System safety support
Tell us about the aircraft or system, its stage of development and the safety question you need help answering.
aero@aerospace.consultingA focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
aero@aerospace.consultingCertification planning, a system safety review, or ongoing technical support for your team.
This opens your email application.
Experience & approach
Tell us about the aircraft or system, its development stage, your next milestone and the technical question you need to resolve.
aero@aerospace.consultingWe can then agree whether a focused review, a defined work package or ongoing support is the right starting point.
This opens your email application.
AI/ML assurance & certification readiness
Tell us what the AI will do, who will rely on its output, the aircraft or engineering process involved, and the next decision you need to make.
aero@aerospace.consultingWe can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.
aero@aerospace.consultingA focused engineering review or ongoing support with requirements, architecture and development assurance.
This opens your email application.
A technical conversation
Tell us about your aircraft or system, the reference you are using and the decision your team needs to make.
aero@aerospace.consultingWe can help connect the guidance to your safety, systems engineering or certification work.
This opens your email application.