(a) Attitudes. Under each of the loading conditions prescribed in paragraph (b) of this section, the rotorcraft is assumed to be in each of the following level landing attitudes: (1) An attitude in which each wheel cont…
Text as of November 12, 2026
The reference collection
Search a citation or topic, narrow the collection and see what each source can tell you.
eCFR text: November 12, 2026 · FAA DRS capture: November 17, 2026
Dated source collection · automatic acquisition not yet scheduled
1217–1224 of 1,876 references
(a) Attitudes. Under each of the loading conditions prescribed in paragraph (b) of this section, the rotorcraft is assumed to be in each of the following level landing attitudes: (1) An attitude in which each wheel cont…
Text as of November 12, 2026
(a) The rotorcraft is assumed to be in the maximum nose-up attitude allowing ground clearance by each part of the rotorcraft. (b) In this attitude, ground loads are assumed to act perpendicular to the ground.
Text as of November 12, 2026
For the one-wheel landing condition, the rotorcraft is assumed to be in the level attitude and to contact the ground on one aft wheel. In this attitude— (a) The vertical load must be the same as that obtained on that si…
Text as of November 12, 2026
(a) The rotorcraft is assumed to be in the level landing attitude, with— (1) Side loads combined with one-half of the maximum ground reactions obtained in the level landing conditions of § 29.479(b)(1); and (2) The loa…
Text as of November 12, 2026
Under braked roll conditions with the shock absorbers in their static positions— (a) The limit vertical load must be based on a load factor of at least— (1) 1.33, for the attitude specified in § 29.479(a)(1); and (2)…
Text as of November 12, 2026
(a) General. Rotorcraft with landing gear with two wheels forward and one wheel aft of the center of gravity must be designed for loading conditions as prescribed in this section. (b) Level landing attitude with only th…
Text as of November 12, 2026
(a) General. Rotorcraft with landing gear with skids must be designed for the loading conditions specified in this section. In showing compliance with this section, the following apply: (1) The design maximum weight, ce…
Text as of November 12, 2026
If certification for ski operation is requested, the rotorcraft, with skis, must be designed to withstand the following loading conditions (where P is the maximum static weight on each ski with the rotorcraft at design m…
Text as of November 12, 2026
Remove a filter, use fewer words or include historical and proposed publications. An empty result does not mean that the FAA has no relevant material.
Clear filtersSearch the wider FAA DRS collection ↗Orders, decisions and issue-paper sources →Source coverage
1,177 section entries, 24 appendices and 3 SFAR entries as of November 12, 2026. Tables and 102 original graphics are included. Text inside graphics is not indexed.
Sections, appendices and included SFARs from Parts 21, 23, 25, 27 and 29 are searchable. Historical CFR editions are not included. Source tables and graphics are retained; text inside graphics is not indexed.
OFR/GPO eCFR ↗1,689 DRS catalogue records: 656 current and 1033 historical. 6 ACs have complete source copies and a separate search within each document.
Records returned by the FAA DRS AC feed, including current and historical editions. Other FAA collections may contain additional publications. AC PDF contents are not included in this collection search. Each hosted AC has its own full-document search. Your search is not sent to the FAA.
FAA DRS ↗FAA AC catalogue ↗19 selected FAA, EASA and industry publication notes. This is not a complete EASA collection.
Reviewed notes and source links for FAA, EASA, SAE and EUROCAE publications. Proposed material and research are labelled. Licensed standards remain with their publishers.
Read selected reference notes →Additional official collections →This is an independent resource. The eCFR is an editorial compilation, not the official legal edition of the CFR. Dates, topic tags and source associations do not establish your programme’s certification basis. Confirm applicability and the required edition at the source.
Bring the aircraft or system, the applicable basis and the question your team needs to resolve.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
aero@aerospace.consultingA focused review, an agreed compliance package or ongoing support alongside your team.
This opens your email application.
System safety support
Tell us about the aircraft or system, its stage of development and the safety question you need help answering.
aero@aerospace.consultingA focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
aero@aerospace.consultingCertification planning, a system safety review, or ongoing technical support for your team.
This opens your email application.
Experience & approach
Tell us about the aircraft or system, its development stage, your next milestone and the technical question you need to resolve.
aero@aerospace.consultingWe can then agree whether a focused review, a defined work package or ongoing support is the right starting point.
This opens your email application.
AI/ML assurance & certification readiness
Tell us what the AI will do, who will rely on its output, the aircraft or engineering process involved, and the next decision you need to make.
aero@aerospace.consultingWe can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.
aero@aerospace.consultingA focused engineering review or ongoing support with requirements, architecture and development assurance.
This opens your email application.
A technical conversation
Tell us about your aircraft or system, the reference you are using and the decision your team needs to make.
aero@aerospace.consultingWe can help connect the guidance to your safety, systems engineering or certification work.
This opens your email application.