(a) Except as provided in paragraph (b) of this section, the limit pilot forces are as follows: (1) For foot controls, 130 pounds. (2) For stick controls, 100 pounds fore and aft, and 67 pounds laterally. (b) For flap…
Text as of November 12, 2026
The reference collection
Search a citation or topic, narrow the collection and see what each source can tell you.
eCFR text: November 12, 2026 · FAA DRS capture: November 17, 2026
Dated source collection · automatic acquisition not yet scheduled
1209–1216 of 1,876 references
(a) Except as provided in paragraph (b) of this section, the limit pilot forces are as follows: (1) For foot controls, 130 pounds. (2) For stick controls, 100 pounds fore and aft, and 67 pounds laterally. (b) For flap…
Text as of November 12, 2026
Each dual primary flight control system must be able to withstand the loads that result when pilot forces not less than 0.75 times those obtained under § 29.395 are applied— (a) In opposition; and (b) In the same direc…
Text as of November 12, 2026
(a) It must be impossible for the tail rotor to contact the landing surface during a normal landing. (b) If a tail rotor guard is required to show compliance with paragraph (a) of this section— (1) Suitable design load…
Text as of November 12, 2026
(a) Horizontal tail surfaces and their supporting structure must be designed for unsymmetrical loads arising from yawing and rotor wake effects in combination with the prescribed flight conditions. (b) To meet the desig…
Text as of November 12, 2026
(a) Loads and equilibrium. For limit ground loads— (1) The limit ground loads obtained in the landing conditions in this part must be considered to be external loads that would occur in the rotorcraft structure if it we…
Text as of November 12, 2026
(a) For specified landing conditions, a design maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This li…
Text as of November 12, 2026
Unless otherwise prescribed, for each specified landing condition, the tires must be assumed to be in their static position and the shock absorbers to be in their most critical position.
Text as of November 12, 2026
Sections 29.235, 29.479 through 29.485, and 29.493 apply to landing gear with two wheels aft, and one or more wheels forward, of the center of gravity.
Text as of November 12, 2026
Remove a filter, use fewer words or include historical and proposed publications. An empty result does not mean that the FAA has no relevant material.
Clear filtersSearch the wider FAA DRS collection ↗Orders, decisions and issue-paper sources →Source coverage
1,177 section entries, 24 appendices and 3 SFAR entries as of November 12, 2026. Tables and 102 original graphics are included. Text inside graphics is not indexed.
Sections, appendices and included SFARs from Parts 21, 23, 25, 27 and 29 are searchable. Historical CFR editions are not included. Source tables and graphics are retained; text inside graphics is not indexed.
OFR/GPO eCFR ↗1,689 DRS catalogue records: 656 current and 1033 historical. 6 ACs have complete source copies and a separate search within each document.
Records returned by the FAA DRS AC feed, including current and historical editions. Other FAA collections may contain additional publications. AC PDF contents are not included in this collection search. Each hosted AC has its own full-document search. Your search is not sent to the FAA.
FAA DRS ↗FAA AC catalogue ↗19 selected FAA, EASA and industry publication notes. This is not a complete EASA collection.
Reviewed notes and source links for FAA, EASA, SAE and EUROCAE publications. Proposed material and research are labelled. Licensed standards remain with their publishers.
Read selected reference notes →Additional official collections →This is an independent resource. The eCFR is an editorial compilation, not the official legal edition of the CFR. Dates, topic tags and source associations do not establish your programme’s certification basis. Confirm applicability and the required edition at the source.
Bring the aircraft or system, the applicable basis and the question your team needs to resolve.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
aero@aerospace.consultingA focused review, an agreed compliance package or ongoing support alongside your team.
This opens your email application.
System safety support
Tell us about the aircraft or system, its stage of development and the safety question you need help answering.
aero@aerospace.consultingA focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
aero@aerospace.consultingCertification planning, a system safety review, or ongoing technical support for your team.
This opens your email application.
Experience & approach
Tell us about the aircraft or system, its development stage, your next milestone and the technical question you need to resolve.
aero@aerospace.consultingWe can then agree whether a focused review, a defined work package or ongoing support is the right starting point.
This opens your email application.
AI/ML assurance & certification readiness
Tell us what the AI will do, who will rely on its output, the aircraft or engineering process involved, and the next decision you need to make.
aero@aerospace.consultingWe can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.
aero@aerospace.consultingA focused engineering review or ongoing support with requirements, architecture and development assurance.
This opens your email application.
A technical conversation
Tell us about your aircraft or system, the reference you are using and the decision your team needs to make.
aero@aerospace.consultingWe can help connect the guidance to your safety, systems engineering or certification work.
This opens your email application.