(a) The methods of fabrication used must produce consistently sound structures. If a fabrication process (such as gluing, spot welding, or heat-treating) requires close control to reach this objective, the process must b…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Each removable bolt, screw, nut, pin, or other fastener whose loss could jeopardize the safe operation of the rotorcraft must incorporate two separate locking devices. The fastener and its locking devices may not be…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
Each part of the structure must— (a) Be suitably protected against deterioration or loss of strength in service due to any cause, including— (1) Weathering; (2) Corrosion; and (3) Abrasion; and (b) Have provisions f…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) The rotorcraft must be protected against catastrophic effects from lightning. (b) For metallic components, compliance with paragraph (a) of this section may be shown by— (1) Electrically bonding the components prop…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
There must be means to allow the close examination of each part that requires— (a) Recurring inspection; (b) Adjustment for proper alignment and functioning; or (c) Lubrication.
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Material strength properties must be based on enough tests of material meeting specifications to establish design values on a statistical basis. (b) Design values must be chosen to minimize the probability of struct…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) The special factors prescribed in §§ 27.621 through 27.625 apply to each part of the structure whose strength is— (1) Uncertain; (2) Likely to deteriorate in service before normal replacement; or (3) Subject to ap…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) General. The factors, tests, and inspections specified in paragraphs (b) and (c) of this section must be applied in addition to those necessary to establish foundry quality control. The inspections must meet approved…
Text as of November 12, 2026
No matches in this collection.
Remove a filter, use fewer words or include historical and proposed publications. An empty result does not mean that the FAA has no relevant material.
1,177 section entries, 24 appendices and 3 SFAR entries as of November 12, 2026. Tables and 102 original graphics are included. Text inside graphics is not indexed.
Sections, appendices and included SFARs from Parts 21, 23, 25, 27 and 29 are searchable. Historical CFR editions are not included. Source tables and graphics are retained; text inside graphics is not indexed.
1,689 DRS catalogue records: 656 current and 1033 historical. 6 ACs have complete source copies and a separate search within each document.
Records returned by the FAA DRS AC feed, including current and historical editions. Other FAA collections may contain additional publications. AC PDF contents are not included in this collection search. Each hosted AC has its own full-document search. Your search is not sent to the FAA.
19 selected FAA, EASA and industry publication notes. This is not a complete EASA collection.
Reviewed notes and source links for FAA, EASA, SAE and EUROCAE publications. Proposed material and research are labelled. Licensed standards remain with their publishers.
This is an independent resource. The eCFR is an editorial compilation, not the official legal edition of the CFR. Dates, topic tags and source associations do not establish your programme’s certification basis. Confirm applicability and the required edition at the source.
Connect the reference to your programme.
Bring the aircraft or system, the applicable basis and the question your team needs to resolve.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Aircraft and system safety assessments
Flight controls, avionics and equipment
Certification planning and compliance evidence
FAA DER services within the applicable delegation
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Flight control and autoflight systems
Hazard assessments and architecture reviews
Avionics and systems integration
Certification and verification planning
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Aircraft and system safety assessments
Flight controls and actuation architecture
Development assurance and verification evidence
Certification planning and technical coordination
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.